Avaya Cajun P550R - Manual (Page 256)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 12-39
IPX
show ipx route
Command Mode
User
Description
Displays the contents of the IPX Routing Table.
Syntax
Table 12-20. Parameters, Keywords, Arguments
Sample Output
The following is an example of the output that displays after you
enter the
show ipx route command.
> show ipx route
Codes: C - Connected primary network, S -
Static, R - RIP
s - seconds
7 Total IPX routes.
IPX default route known
C 100 (Ethernet 802.3), 100
C 1001 (Ethernet II), 1001
C 1002 (Ethernet 802.2), 1002
C 1003 (Ethernet SNAP), 1003
C 10005129(Ethernet SNAP), 10005129
R AAAAAAAA[2/2] via
10005129.00:c0:4f:ae:6b:6d, 10005129
S FFFFFFFFvia 100.02:e0:3b:00:45:63, 100
To
View: show ipx route [{|default}]
Name Definition
network The number of the network whose routing table entry you want to display.
This is an eight-digit hexadecimal number that uniquely identifies a
network cable segment. It can be a number in the range 1 to FFFFFFFD.
You do not need to specify leading zeros in the network number. For
example, for the network number 000000AA, you can enter AA.
default Displays the default route. This is equivalent to specifying a value of
FFFFFFFE for the argument network.