Avaya Cajun P550R - Manual (Page 440)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 21-37
Port
set port remote-fault-detect
Command Mode
Configuration
Description
Enables or disables remote fault detections for gigabit ports.
Syntax
Table 21-31. Parameters, Keywords, Arguments
Sample Output
The following example enables remote fault detection in gigabit
ports 1 and 2 on the module in slot 3 of an Avaya Multiservice
switch.
Cajun(configure)# set port remote-fault-
detect 3/1,3/2 enable
Port remote fault detection enable set:
3/1,3/2.
Systems
Avaya P550R, P580, P880, & P882 Multiservice Switches
To Enable: set port remote-fault-detect {|}
[...,{|}]{disable|enable}
Name Definition
mod-num Specifies the number of the module where the ability to
detect remote link errors for each gigabit port on the module
is to be set.
mod-port-range Specifies a port or a range of gigabit ports whose ability to
detect remote link errors are enabled or disabled.
disable|enable Disables or enables the remote fault detection capability for
the specified gigabit ports.