Avaya Cajun P550R - Manual (Page 117)

Chapter 7
7-14 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
ip dvmrp timers basic
Command Mode
Router-DVMRP
Description
Adjusts the DVMRP network timers. Use the no form of this
command to return to the default values.
Syntax
Table 7-11. Parameters, Keywords, Arguments
Sample Output
The following example configures the IP DVMRP timers
basic with route update time of 35 seconds, a route
expiration time of 75 seconds and route holddown time of
145 seconds.
(configure router:dvmrp)# ip dvmrp timers
basic 35 75 145
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: ip dvmrp timers basic
To
Disable: [no] ip dvmrp timers basic
Name Definition
rte-update Configures the DVMRP route reporting interval. The range of
frequencies at which updates are sent is 30-90 seconds. The
default value is 60 seconds.
rte-expire Interval of time, in seconds, after which a DVMRP route expires.
The interval range is 70-190 seconds. The default value is 140
seconds.
rte-holddown The amount of time, in seconds, that must pass before the route is
removed from the routing table. The range is 120-380 seconds.
The default value is 120 seconds.