Avaya Cajun P550R - Manual (Page 529)

Chapter 26
26-4 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set spantree fwddelay
Command Mode
Configuration
Description
Sets the Spanning Tree forward delay time for a bridge. The default
time is 15 seconds.
Syntax
Table 26-3. Parameters, Keywords, Arguments
Sample Output
The following example sets the spanning tree forward delay to 12
seconds.
# set spantree fwddelay 12 802.1D
Bridge Forward Delay Time Successfully set to 12
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set spantree fwddelay {802.1D|vlan {|name
}}
Name Definition
fwddelay-value The forward delay value for the bridge, in seconds.
The range is 4-30 seconds.
802.1D Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be modified when
in ieee config mode.
vlan-id Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID.
Note: VLAN bridges can only be modified when in
per-vlan or dual-layer mode.
vlan-name Configure a per-vlan or dual-layer bridge by using
the VLAN’s name.
Note: VLAN bridges can only be modified when in
per-vlan or dual-layer mode.