Avaya Cajun P550R - Manual (Page 237)

Chapter 12
12-20 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
ipx route
Command Mode
Configure
Description
Adds a static route to the routing table. The no form of this
command removes a route from the routing table.
Syntax
Table 12-8. Parameters, Keywords, Arguments
Sample Output
The following example adds a static route to the routing table.
(configure)# ipx route 50
100.02:e0:3b:00:45:63
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: ipx route {|default} [
[]]
To Disable: [no] ipx route {|default}
Name Definition
network|default • network - an eight-digit hexadecimal number that
identifies the network on which you are establishing a
static route.
The range is 1 to FFFFFFFD and leading zeros can be omitted
(for 000000BB, enter BB).
• default - creates a static entry for the default-route.
network next-hop-node Network number and node address of the next hop to the
server.
• next-hop-node - The argument node is the node
number of the target Novell server. This is a 48-bit value
represented by a MAC address (aa:bb:cc:dd:ee:ff).
ticks Number of IBM clock ticks of delay to the network for which
you are establishing a static route. The range is 1 to 32000.
hops Number of hops to the network for which you are establishing a
static route. The range is 1 to 16.