Avaya Cajun P550R - Manual (Page 418)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 21-15
Port
set port auto-negotiation-duplex-advertisement
Command Mode
Configuration
Description
Configures negotiation and advertisement of the duplex capability
for a specified port or ports.
Syntax
Table 21-10. Parameters, Keywords, Arguments
Sample Output
The following example sets the auto-negotiation and advertisement
of the duplex capability to full or half-duplex mode for the second
fast ethernet port and ports 7 through 11 on the module in slot 5 or
an Avaya P or PR Multiservice switch.
# set port auto-negotiation-duplex-
advertisement 5/2,5/7-11 full/half duplex
Port auto-negotiation duplex advertisement set: 5/2,5/7,5/
8,5/9,5/10,5/11
To Enable: set port auto-negotiation-duplex-advertisement {|port-range>}[...,{|}] {full/half-
duplex|half-duplex}
Name Definition
mod-num Specifies the number of the module where auto
negotiation and advertisement of the duplex capability for
every fast ethernet port on that module is set to support
full or half duplex operations, or just half duplex
operations.
mod-port-range Specifies a range of fast ethernet port whose ability for
auto negotiation and advertisement of their duplex
capability is set to support full or half duplex operations or
just half duplex operations.
full/half-duplex
|half-duplex Configure the duplex type of a port or range of ports.
• full/half duplex - Specifies that full- or half-duplex
modes may be supported.
• half-duplex - Specifies that half-duplex mode is the only
mode supported.