Avaya Cajun P550R - Manual (Page 328)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 16-3
Logging
logging console
Command Mode
Configure
Description
Sets the type of syslog messages sent to the router's console. The no
form of this command disables the type specified. The default is:
{system|switch_fabric}
Syntax
Table 16-1. Parameters, Keywords, Arguments
Sample Output
The following example specifies that system syslog messages are sent
to the switch’s console.
#
logging console system
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: logging console [{appletalk|start|system|config|temp|
resource|fan|service_port|user_port|power|ospf|auth_failure|
bridge_stat|switch_fabric|cli|dvmrp|ldap|redundant_cpu|rip|
snmp|unknown_mac|vrrp}]
To Set to
Default
Value: no logging console [{appletalk|start|system|config|temp|
resource|fan|service_port|user_port|power|ospf|auth_failure|
bridge_stat|switch_fabric|cli|dvmrp|ldap|redundant_cpu|rip|
snmp|unknown_mac|vrrp}]
Name Definition
start|system...|switch_fabric The types of syslog messages sent to the router’s console.