Avaya Cajun P550R - Manual (Page 203)

Chapter 11
11-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
default-metric
Command Mode
Interface
Description
Sets the default RIP route metric. The no form of this
command restores the default value. The default state is:
built-in, automatic metric translations, as appropriate for
each routing protocol.
Syntax
Table 11-1. Parameters, Keywords, Arguments
Sample Output
The following example sets the default RIP metric value on
the interface labeled ‘”boston” to 10.
(config-if:boston) #
default-metric 10
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: default-metric
To Set
Default
Value: no default-metric
Name Definition
number The default RIP route metric value. The range is 0 to 15.