Avaya Cajun P550R - Manual (Page 211)

Chapter 11
11-10 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
network
Command Mode
Router-RIP
Description
To enable RIP routing process. The no form of this command
disables the RIP routing process.
Syntax
Table 11-8. Parameters, Keywords, Argument
Sample Output
The following example specifies that RIP is the routing protocol used
on all interfaces connected to network 111.0.4.5 and that RIP runs
on subnet 0.255.255.255.
(configure router:rip)#
network 111.0.4.5 0.255.255.255
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: network []
To Set
Default
Value: no network []
Name Definition
ip-address IP address of the network of directly connected networks.
wildcard-mask- mask of the network(s) on which RIP
should run.