Avaya Cajun P550R - Manual (Page 411)

Chapter 21
21-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set port mirror Fabric_mode2
Command Mode
Configuration
Description
Set up or remove a port mirror on a switch in Fabric mode 2.
Syntax
To Enable: set port mirror Fabric_mode2 source-port range> mirror-port channel
direction {tx | rx | both | sa | da } sampling {always | disable
| periodic} [sa ] [da ] [max-
packets-sec ]
To Disable: clear port mirror Fabric_mode2 channel
Table 21-5. Parameters, Keywords, Arguments
Parameter Definition
range> Either the single port or the range of ports that you want
to mirror. See Table 21-6 for the specific port ranges that
you can mirror.
The port to which you want to mirror traffic.
Both the source port and mirror port must either:
• Be on the same vlan and have the same vlan
binding
or
• Have vlan binding set to bind to all
Note: Avaya recommends that you mirror traffic to a
port of the same speed or faster than the source
port.
The mirror channel that you want to use. Four channels
are available. Enter a number from 1 to 4.
1 of 2