Avaya Cajun P550R - Manual (Page 485)

Chapter 23
23-28 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
The maximum bits per second that you
want to assign to the queue.
If the switch is operating in Fabric mode 1,
the rate can range from 220 Kbps to 1.5
Gbps.
If the switch is operating in Fabric mode 2,
the rate can range from 270 Kbps to 1.5
Gbps
Entering a rate of 0 disables the queue.
The maximum size of burst that is
guaranteed transfer. Bursts that are
smaller than this size are guaranteed
transfer. Bursts that are larger than this
size are either serviced by WFQ or
dropped (whichever action that you
specify). The default setting is servicing
by WFQ and the default weight for the
queues.
The normal burst can range from 0 to
15,000 bytes. Avaya recommends a value
of 6000.
Enter this setting in a multiple of four. If
you do not enter a multiple of four, the
switch rounds down the number that
you enter to a multiple of four. For
example, if you enter a normal burst size
of 43 byes, the switch converts the
setting to 40 bytes. If you enter a normal
burst size of 0,1,2 or 3, the switch stores a
value of 0 and no data is forwarded from
the queue.
exceed The action that you want the switch to
take if the bit rate exceeds the
guaranteed bit rate that you specify. The
switch can either drop packets or forward
them based on the weight of the queue.
drop Indicates that you want the switch to
drop packets when the bit rate exceeds
the guaranteed bit rate.
Table 23-11. Keywords, Arguments, and Options
Keyword, Argument
or Option Definition
2 of 3