Avaya Cajun P550R - Manual (Page 206)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 11-5
IP-RIP
ip rip default-route-mode
Command Mode
Interface
Description
Sets the RIP default route characteristics. The no form of this
command disables the default route characteristics.
Syntax
Table 11-4. Parameters, Keywords, Arguments
Sample Output
The following example sets the RIP default route
characteristics for interface labeled “boston” to talk-listen
mode.
(config-if:boston)#
ip rip default-route-mode talk-listen
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: ip rip default-route-mode {talk-only|listen-only| talk-listen|disable}
To Set
Default
Value: no ip rip default-route-mode {talk-only| listen-only|talk-listen|disable}
Name Definition
talk-only|
listen-only|
talk-listen|disable The RIP default route characteristics.
• talk-only - The default route is advertised in RIP updates
but ignored on incoming neighbor updates.
• listen-only - The default route is suppressed from RIP
updates but accepted on incoming neighbor updates.
• talk-listen - The default route is advertised and
accepted.
• disable - The default route is not advertised or accepted.