Avaya Cajun P550R - Manual (Page 459)

Chapter 23
23-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
access-list
Command Mode
Global Configuration
Description
Sets a rule in an access control list (ACL). The rule that you set is
applied on all of the ports on the switch.
* Note: You must enable the ACL on which you want to set a
rule. Only one ACL can be enabled at a time.
Syntax
To set up a
standard
ACL rule: access-list {permit [{use-priority
| use-diffserv [mask] | remark-diffserv [mask] | use-l2}] |
deny | fwd1 | fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8} {addr> | any | host }
To set up
an
extended
ACL rule: access-list {permit [{use-priority
| use-diffserv [mask] | remark-diffserv [mask] | use-l2}] |
deny | fwd1 | fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8}
{ | any | host } [{lt |
eq | gt | range }] { |
any | host } [{lt | eq | gt | range <port>
}] [established]
Table 23-1. Keywords, Arguments, and Options
Keyword, Argument
or Option Definition
A unique name that identifies the access
control list.
The unique rule number within the
access list.
permit Forwards the packet without changing its
priority.
use-priority Assigns the priority that you define in the
following parameter to the
packet.
1 of 4