Avaya Cajun P550R - Manual (Page 527)

Chapter 26
26-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set spantree
Command Mode
Configuration
Description
Enabled or disabled individual spanning tree bridges. The default
state is enabled.
Syntax
Table 26-1. Parameters, Keywords, Arguments
Sample Output
The following example disables spanning tree 802.1D protocol on a
bridge:
# set spantree disable 802.1D
Bridge successfully disabled
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set spantree {enable|disable} {802.1D | vlan { | name name>}}
Name Definition
enable Enable the bridge.
disable Disable the bridge.
802.1D Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be modified in the
IEEE config mode.
vlan-id Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID.
Note: VLAN bridges can only be modified when in per-
vlan or dual-layer mode.
vlan-name Configure a per-vlan or dual-layer bridge by using
the VLAN’s name.
Note: VLAN bridges can only be modified when in per-
vlan or dual-layer mode.