Avaya Cajun P550R - Manual (Page 58)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 3-11
Appletalk
appletalk static cable-range
Command Mode
Configuration
Description
Creates an Appletalk static route. The no form of this
command removes the static route itself, or only removes a
zone from the static route if the zone name is supplied.
Syntax
Table 3-8. Parameters, Keywords, Arguments
To Enable: appletalk static cable-range to
[floating] zone
To Disable: [no] appletalk static cable-range to
Name Definition
cable-range The range of Appletalk network values to be used for this
static route. Specify start and end values, in decimal,
between 0 and 65279 and separate the values with a
hyphen.
The starting network number must be less than the
ending network number. The next hop Appletalk router
is specified via the network.node parameter.
network.node Specifies the Appletalk Network Address of the next hop
to the destination network. (Both numbers are in
decimal.)
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and 254.
floating Specifies that a dynamic route update for this network
can replace the route entry created by this command.
The floating argument is optional. If supplied, the route
defined via this command may be overwritten by an
Appletalk routing update. The default is to ignore
Appletalk route updates for this cable range.
zone • zone-name - The zone-name specifies a zone
name to be associated with this destination.
When the keyword zone and the zone-name are
omitted, the static route is removed.