Avaya Cajun P550R - Manual (Page 374)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 19-27
OSPF
ip ospf transmit-delay
Command Mode
Interface
Description
Sets the estimated time it takes to transmit a link state update packet
on the interface. To return to the default value, disable using the no
form of this command.
Syntax
Table 19-19. Parameters, Keywords, Arguments
Sample Output
The following command sets the transmit delay time on interface
123 to 1000 seconds.
>(config-If:123)#ip ospf transmit-delay 1000
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
To Enable: ip ospf transmit-delay
To Disable: [no] ip ospf transmit-delay
Name Definition
seconds Time in seconds that it takes to transmit a link state
update. The range is 1 to 3600 seconds. The default is 1
second.