Set buffering fabric-port (hipri-alloc), Set buffering fabric-port (hipri-alloc) -3, Command mode – Avaya Cajun P550R User Manual
Page 78: Description, Syntax, Sample output, Systems
Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
4-3
Buffering
set buffering fabric-port (hipri-alloc)
Command Mode
Configuration
Description
Set the input or output buffer high priority allocation
percentage. The default percentage value is 20%.
* Note: The switch must be rebooted for changes to this
parameter to take effect.
Syntax
Table 4-2. Parameters, Keywords, Arguments
Sample Output
The following example sets the buffer high priority
allocation percentage for fabric port 4/1 to 30%.
output hipri-alloc 30
Buffers for fabric-port 4/2 set.
Systems
Avaya P550R/Avaya P550R/P580/P880/P882 Multiservice
Switch
To Enable:
set buffering fabric-port <
fabric-port-spec>
[routing]
{input|output} hipri-alloc
{10|20|30|40|50}
Name
Definition
fabric-port-spec
Enter a particular fabric port or a range of fabric ports on
a module.
routing
Set the routing buffer parameters.
input|output
Input or output buffering.
hipri-alloc
The high priority allocation percentage ranges are: 10,
20, 30, 40, or 50.