Avaya Cajun P550R - Manual (Page 54)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 3-7
Appletalk
appletalk cable-range
Command Mode
Interface
Description
Configure a cable range for an Appletalk Phase II for an
interface. The no form of this command disables Appletalk
for this interface.
Syntax
Table 3-5. Parameters, Keywords, Arguments
Sample Output
The following example configures a cable range of 222-224
for the Appletalk interface on serial port 0.
(config-if:serial0)#
appletalk cable-range 222.244
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches
To Enable: appletalk cable-range []
To Disable: [no] appletalk cable-range
Name Definition
cable-range An optional parameter to indicate the range of the
Appletalk network values to be used on this interface.
Specify start and end values between 0 and 65279 and
separate the values with a hyphen.
The starting network number must be less than the
ending network number. When cable-range is omitted, the
interface tries to configure the Appletalk network and
obtains its configuration from another Appletalk router.
network.node The Appletalk network address to assign to the interface.
When network.node is omitted, the Appletalk address
defaults to 0.0.
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and 254.