Allied Telesis AT-S62 - Manual (Page 95)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 95
The File System tab is shown in Figure 27.
Figure 27 File System Tab
The information in the tab is defined below:
Current Drive
Specifies the location of the file system. The AT-8500 Series switch
has just one file system, located in flash memory. This will always
indicate Flash. This cannot be changed.
Default Configuration File
Specifies the filename of the active configuration file. The switch
uses this file to configure its operating parameters whenever it is
reset or power cycled. The active boot file is also the file that is
updated whenever you select the Save Config option.
Current Files
Lists the files stored in the file system. The columns are defined
here:
File Name - The name of the system file.
Device - The storage location of the file. This column will be empty
for all files on an AT-8500 Series switch.
Size - The size of the file in kilobytes.
Modified - The date the file was created or last modified.