Allied Telesis AT-S62 - Manual (Page 286)

Chapter 22: GARP VLAN Registration Protocol
Section V: Virtual LANs 286
Displaying the GVRP Settings
To view the GVRP settings, perform the following procedure:
1. From the Home page, select Monitoring.
2. Select the Layer 2 option.
3. Select the GVRP tab.
For definitions of the GVRP parameters, refer to Configuring GVRP
on page 283.
4. To view GVRP switch and port configuration information, select one
of the following and click View:
View Port Configuration
Displays the status of GVRP on each port. Normal indicates that
GVRP is active on a port while None means it is inactive.
View GVRP Database
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection.
View GVRP State Machine for VLAN
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection. You must enter
a VID number.
View GVRP Counters
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection.
View GIP Connected Ports Ring
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection.