Allied Telesis AT-S62 - Manual (Page 83)

AT-S62 Web Browser Interface User’s Guide
Section I: Basic Operations 83
Deleting a Static Port Trunk
Caution
Disconnect the cables from the port trunk on the switch before
performing the following procedure. Deleting a static port trunk
without first disconnecting the cables can create loops in your
network topology. Data loops can result in broadcast storms and
poor network performance.
To delete a static port trunk from the switch, perform the following
procedure:
1. From the Home Page, select Configuration.
2. From the Configuration menu, select Layer 1.
3. Select the Port Trunking tab.
The Port Trunking tab is shown in Figure 21 on page 79.
4. Click the button next to the static port trunk you want to delete and
click Remove.
The port trunk is deleted from the switch.
5. To permanently save the change, click the Save Config menu option.