Allied Telesis AT-S62 - Manual (Page 64)

Chapter 5: Port Parameters
Section I: Basic Operations 64
Displaying Port Status and Statistics
The procedure in this section displays the operating status of the ports
on a switch and port statistics. You can view a port’s operating speed,
duplex mode, MDI/MDI-X configuration, and more. You can also view
the operating status of any GBIC modules installed in an AT-8550GB.
To display the status or statistics of a switch port, perform the following
procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 option.
3. Select the Port Settings tab.
4. Click a port. You can select more than one port at a time when you
want to display port status. However, you can select only one port
when displaying statistics. A selected port turns white. (To deselect a
port, click it again.)
5. Click Status to display the port’s operating status or Statistics to
display port statistics.
If you select port status, the Port Status page in Figure 17 is
displayed.
Figure 17 Port Status Page
The information in this page is for viewing purposes only. To
adjust port parameters, refer to Configuring Port Parameters on
page 58.
The columns in the page are described below:
Port
The port number.
Name
The name of the port.