Allied Telesis AT-S62 - Manual (Page 253)

AT-S62 Web Browser Interface User’s Guide
Section IV: Spanning Tree Protocols 253
Table 9 lists the STP port costs with Auto-Detect when a port is
part of a port trunk.
6. After configuring the parameters, click Apply.
7. To permanently save the change, use the Save Changes button in the
General tab. For directions, refer to Saving Your Parameter Changes
on page 23.
Table 9 STP Auto-Detect Port Trunk Costs
Port Speed Port Cost
10 Mbps 4
100 Mbps 4
1000 Mbps 2