Allied Telesis AT-S62 - Manual (Page 56)

Chapter 4: SNMPv1 and SNMPv2 Community Strings
Section I: Basic Operations 56
Displaying the SNMP Status and Community Strings
To display the SNMPv1 and SNMPv2c community strings on the switch,
do the following:
1. From the Home page, select Monitoring.
2. Select the Mgmt. Protocols menu option.
3. Select the SNMP tab.
The information in the tab includes:
SNMP Access
Whether SNMP access is enabled or disabled.
Authentication Failure Trap
Whether the authentication failure trap is enabled or disabled.
4. Click View in the SNMPv1/v2c section of the tab.
The information in the tab is described below:
Community Name
The community string.
Access
Whether access is read/write or read only.
Manager Stations
The IP addresses of the management stations that can use a
community string to access the switch. This only applies if the
string has a closed access status.
Trap Receivers
IP addresses of management stations to receive SNMP traps from
the switch.
Open Access
Displays the opened or closed access status of the string:
Yes - The string’s status is open, meaning that any workstation can
use it.
No - The string’s status is closed, meaning that only those
workstations whose IP addresses have been assigned to the string
can use it.
Status
Displays the status of the string. The possible values are:
Enabled - The string can be used to access the switch.
Disabled - The string cannot be used to access the switch.