Allied Telesis AT-S62 - Manual (Page 37)

AT-S62 Web Browser Interface User’s Guide
Section I: Basic Operations 37
Displaying System Information
To view basic information about the switch, perform the following
procedure:
1. From the Home page, select Monitoring.
2. Select the System menu option.
3. Select the General tab. This tab is for viewing purposes only. You
cannot change any of the values from this tab. The information in the
tab is defined below:
System Name
The name of the switch.
Administrator
The name of the network administrator responsible for managing
the switch.
Comments
The location of the switch, (for example, 4th Floor - rm 402B).
DHCP/BOOTP
The status of the DHCP and BOOTP client software. If enabled, the
switch is obtaining its IP information from a DHCP or BOOTP
server on the network.
MAC Address Aging Timer
The time interval an inactive dynamic MAC address can remain in
the MAC address table before it is deleted.
IP Address
The switch’s IP address.
Subnet mask
The switch’s subnet mask.
Default Gateway
The IP address of a router for remote management.
System Up Time
The length of time since the switch was last reset or power cycled.
Application Software
The version number and build date of the AT-S62 software.
Bootloader
The version number and build date of the AT-S62 bootloader.