Allied Telesis AT-S62 - Manual (Page 141)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 141
The Modify Flow Group page is shown in Figure 42.
Figure 42 Modify Flow Group Page
5. Configure the following parameters as necessary:
ID
Specifies the ID number for this flow group. You cannot change
this value.
DSCP
Specifies a replacement value to write into the DSCP (TOS) field of
the packets. The range is 0 to 63. A new DSCP value can be set at
all three levels: flow group, traffic class, and policy. A DSCP value
specified in a flow group overrides a DSCP value specified at the
traffic class or policy level.
Remark Priority
Replaces the user priority value in the packets with the new value
specified in the Priority parameter.
Description
Specifies the flow group description. A description can be up to 15
alphanumeric characters, including spaces.
Priority (802.1p)
Specifies a new user priority value for the packets. The range is 0
to 7. If you specify a new user priority value here and in Traffic
Class, the value here overrides the value in Traffic Class. If you
want the packets to retain the new value when they exit the
switch, change Remark Priority to Yes.