Allied Telesis AT-S62 - Manual (Page 111)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 111
Saving the Event
Log
You can save the current events in the log as a file in the file system, from
where you can view it or download it to your management workstation.
To save the current events, do the following:
1. From the Home Page, click either Configuration.
2. Select the System menu option.
3. Select the Event Log tab.
The Event Log tab is shown in Figure 29 on page 105.
4. In the Filter Settings and Actions section of the tab, adjust the settings
to indicate which events you want to save to the file. For information
on the settings, refer to Displaying the Event Log on page 106.
5. In the Save Filename field, enter a name for the file. The name can be
up to 16 alphanumeric characters, followed by a 3 letter extension.
The extension should be “.log”.
6. Click Save.
The selected events are immediately saved to the file system. For
instructions on how to upload the file to a TFTP server, refer to
Uploading a File on page 101.
Clearing the
Event Log
To clear all events from the log, perform the following procedure:
1. From the Home Page, click Configuration.
2. From the System page, select the Event Log tab.
The Event Log tab is shown in Figure 29 on page 105.
3. In Log Settings, click Clear Log.
4. Click Apply.
The log, if enabled, immediately begins to learn new events.