Allied Telesis AT-S62 - Manual (Page 135)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 135
Deleting an Access Control List
To delete an ACL, perform the following procedure:
1. From the Home Page, select Configuration.
2. Select the Network Security menu selection.
3. Select the ACL tab.
The ACL tab is shown in Figure 37 on page 130.
4. Click the dialog circle next to the ID number of the ACL you want to
delete and click Delete. You can delete only one ACL at a time. The
ACL is immediately deleted.
5. To permanently save your changes, select the Save Config menu
selection.