Allied Telesis AT-S62 - Manual (Page 55)

AT-S62 Web Browser Interface User’s Guide
Section I: Basic Operations 55
Deleting a Community String
To delete a community string, do the following:
1. From the Home page, select Configuration.
2. Select the Mgmt. Protocols menu option.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 11 on page 48.
4. Click Configure in the SNMPv1/v2c section of the tab.
The SNMP tab for SNMPv1 and SNMPv2c is shown in Figure 12 on
page 50.
5. Click the button next to the community string you want to delete. You
can select only one community string.
6. Click Remove.
A confirmation prompt is displayed.
7. Click OK. The community string is deleted from the switch.
8. To permanently save the change, select the Save Config menu
option.