Allied Telesis AT-S62 - Manual (Page 94)

Chapter 9: File System
Section II: Advanced Operations 94
Viewing System Files or Changing the Active Configuration File
This procedure displays the files stored in the switch’s file system. This
procedure also explains how to change the active boot configuration file
on the switch. The active boot configuration file is used by the switch to
configure its operating parameters whenever the unit is reset or power
cycled. The active boot file is also the file that is updated whenever you
select the Save Config option.
Note the following before performing this procedure:
❑ You cannot create a new configuration file from a web browser
management session. That function must be performed from a
local, Telnet, or SSH session.
❑ You cannot copy, rename, delete, or view the contents of files in
the file system from a web browser management session. Those
tasks must be performed from a local, Telnet, or SSH session.
To change the active boot configuration file or to view system files,
perform the following procedure:
1. From the Home Page, select Configuration or Monitoring.
To change the active boot configuration file, select Configuration.
2. From the Configuration or Monitoring menu, select the Utilities
menu option.
3. Select the File System tab.