Allied Telesis AT-S62 - Manual (Page 127)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 127
Deleting a Classifier
This procedure explains how to delete a classifier. If the classifier you
want to delete is currently assigned to an ACL or QoS policy, you must
first remove it from the ACL or policy.
To delete a classifier, perform the following procedure:
1. From the home page, select Configuration.
2. Select the Network Security or Services menu selection. (The
Classifier tab is accessible from both menu selections.)
3. Select the Classifier tab.
The Classifier tab is shown in Figure 33 on page 120.
4. Click the button next to the ID number of the classifier you want to
delete and click Delete.
5. To permanently save your changes, select the Save Config menu
selection.