Allied Telesis AT-S62 - Manual (Page 152)

Chapter 14: Quality of Service
Section II: Advanced Operations 152
Active
Whether or not this policy is active on the switch. An active policy
is assigned to one or more switch ports. An inactive policy is not
assigned to any switch ports.
Traffic Class List
The traffic classes assigned to the policy.
Ingress Port List
The ingress ports to which the policy is assigned.
4. Click Create.
The Create Policy page is shown in Figure 47.
Figure 47 Create Policy Page
5. Configure the following parameters as necessary:
ID
Specifies an ID number for the policy. Every policy on the switch
must be assigned a unique number. The range is 0 to 255. The
default is 0. This parameter is required.
Description
Specifies the policy description. A description can be up to 15
alphanumeric characters, including spaces.
Remark DSCP
Specifies the conditions under which the ingress DSCP value is
overwritten. Select one of the following options from the list:
None - Disables this function.
All - All packets are remarked.