Allied Telesis AT-S62 - Manual (Page 325)

AT-S62 Web Browser Interface User’s Guide
Section VII: Management Security 325
Displaying the RADIUS or TACSACS+ Settings
To display the RADIUS or TACACS+ settings on a switch, do the
following:
1. From the Home page, select Monitoring.
2. Select the Mgmt. Protocols menu selection,
3. Select the Server-based Authentication tab.
The upper part of the page displays whether server-based
authentication is enabled or disabled and the authentication
method. The lower part of the page allows you to view the
authentication protocol settings.
4. To view the TACACS+ or RADIUS settings, click TACACS+ or RADIUS.
5. Click View.
The TACACS+ or RADIUS client configuration page is displayed.