Allied Telesis AT-S62 - Manual (Page 207)

AT-S62 Web Browser Interface User’s Guide
Section III: SNMPv3 Operations 207
8. In the Write View Name field, enter a value that you configured with
the View Name parameter in the View Table.
This parameter allows the users assigned to this Security Group to
write, or modify, the information in the specified View Table. This
value does not need to be unique.
9. In the Notify View Name field, enter a value that you configured with
the View Name parameter in the View Table.
This parameter allows the users assigned to this Group Name to
send traps permitted in the specified View. This value does not
need to be unique.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
10. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Access Table to the configuration file. After making
changes to an Access Table entry with a Volatile storage type, the
Save Config menu selection does not appear.
NonVolatile
Select this storage type if you want the ability to save an entry in
the Access Table to the configuration file. After making changes
to an Access Table entry with a NonVolatile storage type, the Save
Config menu selection appears.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the Access Table entry takes effect
immediately.
11. Click Apply to update the SNMPv3 Access Table.
12. To save your changes, select the Save Config menu selection.