Allied Telesis AT-S62 - Manual (Page 33)

AT-S62 Web Browser Interface User’s Guide
Section I: Basic Operations 33
Note
This procedure describes the parameters in the Administration
section of the tab. The Passwords section is described in Configuring
the Manager and Operator Passwords on page 38. The
DHCP/BOOTP options are described in Activating the BOOTP or
DHCP Client Software on page 36. The MAC address aging time
option is described in Changing the Aging Time on page 76.
Note
The Defaults button returns all parameters in this tab to their default
settings. To return all switch parameters to the default values, refer
to Returning the AT-S62 Software to the Factory Default Values on
page 45
The Reset button resets the switch, as explained in Rebooting a
Switch on page 40.
4. Change the parameters as desired.
The parameters in the Administration section are described
below:
System Name
This parameter specifies a name for the switch (for example, Sales
Ethernet switch). The name is displayed at the top of the AT-S62
management pages and tabs. The name can be from 1 to 39
characters. The name can include spaces and special characters,
such as exclamation points and asterisks. The default is no name.
This parameter is optional.
Note
Allied Telesyn recommends assigning each switch a name. Names
can make it easier for you to identify the various switches when you
manage them and help you avoid performing a configuration
procedure on the wrong switch.
Administrator
This parameter specifies the name of the network administrator
responsible for managing the switch. The name can be from 1 to
39 characters. It can include spaces and special characters, such as
dashes and asterisks. The default is no name. This parameter is
optional.