Allied Telesis AT-S62 - Manual (Page 277)

AT-S62 Web Browser Interface User’s Guide
Section V: Virtual LANs 277
Deleting a Port-based or Tagged VLAN
To delete a port-based or tagged VLAN from the switch, perform the
following procedure:
1. From the Home Page, select Configuration.
2. Select the Layer 2 menu selection.
3. Select the VLAN tab.
The VLAN tab is shown in Figure 101 on page 271.
4. Click the button next to the name of the VLAN you want to delete.
You cannot delete the Default_VLAN.
5. Click Remove.
A confirmation prompt is displayed.
6. Click OK to delete the VLAN or Cancel to cancel the procedure.
If you click OK, the VLAN is deleted from the switch. The untagged
ports in the VLAN are returned to the Default_VLAN as untagged
ports.
7. To permanently save the change, select the Save Config menu
selection.