Allied Telesis AT-S62 - Manual (Page 174)

Chapter 17: Denial of Service Defense
Section II: Advanced Operations 174
Displaying the DoS Settings
To display the DoS settings, do the following:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Security option.
3. Select the DoS tab.
The DoS tab is shown in Figure 55.
Figure 55 DoS Tab (Monitoring)
4. Click the port whose DoS settings you want to view. You can select
more than one port at a time.
5. Using the DoS Type list, select the type of Denial of Service defense
whose settings you want to view.
6. Click View.