Modifying a policy, Deleting a policy, Modifying a policy deleting a policy – Allied Telesis AT-S62 User Manual
Page 154
Chapter 14: Quality of Service
Section II: Advanced Operations
154
Modifying a
Policy
To modify a policy, perform the following procedure:
1. From the Home Page, select Configuration.
2. Select the Services menu selection.
3. Select the Policies tab.
The Policies tab is shown in Figure 46 on page 151.
4. Select the policy to modify from the list and click Modify.
The Modify Policy page is shown in Figure 48.
Figure 48 Modify Policy Page
5. Modify the parameters as necessary. For definitions of the
parameters, refer to Creating a Policy on page 151. You cannot
change the ID number of a policy.
6. After you are finished modifying the parameters, click Apply.
7. To permanently save your changes, select the Save Config menu
selection.
Deleting a Policy
To delete a policy, perform the following procedure:
1. From the Home Page, select Configuration.
2. Select the Services menu selection.
3. Select the Policies tab.
The Policies tab is shown in Figure 46 on page 151.
4. Do one of the following: