Allied Telesis AT-S62 - Manual (Page 90)

Chapter 8: Port Mirroring
Section I: Basic Operations 90
Deleting a Port Mirror
To delete a port mirror so that you can use the destination port for
normal network operations, perform the procedure Creating a Port
Mirror on page 86. Disable the port mirror using the Enable Mirror
option and then click the destination port to change it from white to
black. Once black, the port is available for normal network operations.
Then click Apply.
To permanently save the change, use the Save Changes button in the
General tab. For directions, refer to Saving Your Parameter Changes on
page 23.