Allied Telesis AT-S62 - Manual (Page 84)

Chapter 7: Static Port Trunks
Section I: Basic Operations 84
Displaying the Static Port Trunks
To display the static port trunks on the switch, do the following:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 menu option.
3. Select the Port Trunking tab.
The Port Trunking tab displays the following information:
ID
The ID number of the trunk.
Name
The name of the trunk.
Type
The load distribution method:
❑ SA - Source MAC address (Layer 2)
❑ DA - Destination MAC address (Layer 2)
❑ SA/DA - Source/destination MAC address (Layer 2)
❑ SI - Source IP address (Layer 3)
❑ DI - Destination IP address (Layer 3)
❑ SI/DI - Source/destination IP address (Layer 3)
Ports
The ports of the trunk.