Allied Telesis AT-S62 - Manual (Page 245)

AT-S62 Web Browser Interface User’s Guide
Section III: SNMPv3 Operations 245
Displaying
SNMPv3
Community
Table Entries
To display entries in the SNMPv3 Community Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
4. From the SNMP Monitoring Tab, click the circle next to the View
Community Table.
5. Click View at the bottom of the page.
The Monitoring, SNMPv3 Community Table Page is shown in
Figure 90.
Figure 90 Monitoring, SNMPv3 Community Table Page