Allied Telesis AT-S62 - Manual (Page 123)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 123
VLAN ID
Defines a traffic flow of tagged packets by its VLAN ID number.
The range is 1 to 4094.
Protocol
Defines a traffic flow as one of the following Layer 2 protocols:
❑ User Specified
❑ IP
❑ ARP
❑ RARP
User Specified Protocol
Defines a traffic flow of a Layer 2 protocol by its protocol number.
The number can be entered in either decimal or hexadecimal
format. For the latter, precede the number with “0x”. To use this
parameter, the Protocol parameter must be set to User Specified.
TOS/DSCP
Defines a traffic flow by its Type of Service or DSCP value. To set
this parameter, the Protocol parameter must be set to IP. Options
are:
❑ TOS (Type of Service)
❑ DSCP
TOS
Defines a traffic flow by its Type of Service value. The range is 0 to
7. To set this value, the TOS/DSCP parameter must be set to TOS.
DSCP
Defines a traffic flow by its DSCP value. The range is 0 to 63. To set
this value, the TOS/DSCP parameter must be set to DSCP.
IP Protocol
Defines a traffic flow of a Layer 3 protocol. Options are:
❑ User Specified
❑ TCP
❑ UDP
❑ ICMP
❑ IGMP
User Specified IP Protocol
Defines a traffic flow of a Layer 3 protocol by its protocol number.
The number can be entered in either decimal or hexadecimal