Allied Telesis AT-S62 - Manual (Page 233)

AT-S62 Web Browser Interface User’s Guide
Section III: SNMPv3 Operations 233
6. In the Community Index field, enter a numerical value for this
Community.
This parameter is used to index the other parameters in an
SNMPv3 Community Table entry. Enter a value of up to 32-
alphanumeric characters.
7. In the Community Name field, enter a Community Name of up to
64-alphanumeric characters.
The value of the Community Name parameter acts as a password
for the SNMPv3 Community Table entry. This parameter is case
sensitive.
Note
Allied Telesyn recommends that you select SNMP Community
Names carefully to ensure these names are known only to
authorized personnel.
8. In the Security Name field, enter a name of an SNMPv1 and SNMPv2c
user.
This name must be unique. Enter a value of up to 32 alphanumeric
characters.
Note
Do not use a value configured with the User Name parameter in the
SNMPv3 User Table.
9. In the Transport Tag field, enter a name of up to 32 alphanumeric
characters.
The Transport Tag parameter links an SNMPv3 Community Table
entry with an SNMPv3 Target Address Table entry. Add the value
you configure for the Transport Tag parameter to the Tag List
parameter in the Target Address Table as desired. See Creating a
Target Address Table Entry on page 218.
10. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 Community Table to the configuration file.
After making changes to an SNMPv3 Community Table entry with
a Volatile storage type, the Save Config menu selection does not
appear.
NonVolatile
Select this storage type if you want the ability to save an entry in
the SNMPv3 Community Table to the configuration file. After