Allied Telesis AT-S62 - Manual (Page 272)

Chapter 21: Virtual LANs
Section V: Virtual LANs 272
This tab displays the VLANs on the switch. The columns in the tab
are defined below:
VLAN ID
The VID number assigned to the VLAN.
(Client) Name
The name of the VLAN.
Uplink Port
This column contains “NA,” meaning Not Applicable, for tagged
and port-based VLANs. For a protected ports VLAN, this column
contains the uplink port(s) for the port groups. A tagged uplink
port is designated with a “T” and an untagged uplink port has a
“U.” If the switch is operating in one of the two multiple VLAN
modes this column displays the port that is functioning as the
uplink port for the other ports on the switch.
Type - Either Port Based, for both port-based and tagged VLANs, or
GVRP Dynamic, for VLANs created by GVRP.
Protocol - If this column contains None, the VLAN is a port-based,
tagged, or protected ports VLAN. If it contains GARP, the VLAN or the
port is a dynamic GVRP VLAN or a dynamic GVRP port of a static VLAN.
Tagged(T)/Untagged(U) Port
Lists the ports of the VLAN. Tagged ports are designated with a “T”
and untagged ports with a “U.”
4. To create a new VLAN, click Add.
The Add New VLAN page is shown in Figure 102.
Figure 102 Add New VLAN Page