Allied Telesis AT-S62 - Manual (Page 82)

Chapter 7: Static Port Trunks
Section I: Basic Operations 82
An example of the Modify Trunk page is shown in Figure 23.
Figure 23 Modify Trunk Page
Note
You cannot change the Trunk ID number or the load distribution
method of a port trunk.
5. To change the name of the trunk, click the Trunk Name field and
modify the name as needed. The name can be up to sixteen
alphanumeric characters. No spaces or special characters, such as
asterisks and exclamation points, are allowed. Each trunk must have a
unique name.
6. To add or remove ports from a trunk, click the ports in the graphical
image of the switch. A selected port changes to white. An unselected
port is black. A port trunk can contain up to eight ports.
7. Click Apply.
Changes to a port trunk are immediately activated on the switch.
8. To permanently save the change, click the Save Config menu option.
9. Reconnect the cables to the ports of the trunk.