beautypg.com

Creating a new port-based or tagged vlan, Figure 101: vlan tab (configuration) – Allied Telesis AT-S62 User Manual

Page 271

background image

AT-S62 Web Browser Interface User’s Guide

Section V: Virtual LANs

271

Creating a New Port-based or Tagged VLAN

To create a new port-based or tagged VLAN, perform the procedure
below:

1. From the Home Page, select Configuration.

2. Select the Layer 2 menu selection.

3. Select the VLAN tab.

The VLAN tab is shown in Figure 101.

Figure 101 VLAN Tab (Configuration)

Note

The tab will not include the Modify and Remove buttons if the only
VLAN on the switch is the Default_VLAN.

The VLAN Mode and Uplink Port options are explained in
Selecting a VLAN Mode on page 279. The Mgmt. VLAN ID option
is explained in Specifying a Management VLAN on page 280.

See also other documents in the category Allied Telesis Computer hardware: