Allied Telesis AT-S62 - Manual (Page 131)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 131
Description
A description of the ACL.
Action
The action of the ACL. An action of Permit means the ACL accepts
packets that match the traffic flows defined by the classifiers. An
action of Deny means that the ACL discards ingress packets that
match the defined traffic flows, provided that the packets do not
also meet the criteria of a Permit ACL. (A Permit ACL overrides a
Deny ACL.)
Active
The status of the ACL. A status of Yes means that the ACL is
assigned to at least one port on the switch. A status of No means
the ACL is not assigned to any ports and so is inactive
Classifier List
The classifiers assigned to the ACL.
Port List
The ports assigned to the ACL.
4. To create a new ACL, click Create.
The Create ACLs page is shown in Figure 38.
Figure 38 Create ACLs Page
5. Configure the following parameters:
ID
Use this field to enter an ID number for the ACL. Every ACL on the
switch must have a unique ID number. The range is 0 to 255.
Classifier List
Use this list to select the classifier you want to assign to this ACL.
You can assign more than one classifier to an ACL. To select
multiple classifiers, hold down the Ctrl key while making your