Allied Telesis AT-S62 - Manual (Page 178)

Chapter 18: Power Over Ethernet
Section II: Advanced Operations 178
Configuring PoE Port Settings
This procedure enables and disables PoE on a port. This procedure also
sets a port’s priority level and its maximum power usage.
The default setting for PoE on a port is enabled. You do not have to
disable PoE on ports that are connected to non-powered devices (that is,
devices that receive their power from another power source). A port
connected to a network node that is not a powered device functions as a
regular Ethernet port, without PoE. The PoE feature remains activated on
the port but no power is delivered to the device.
To configure PoE port settings, do the following:
1. From the Home Page, select Configuration.
2. Select the System menu option.
3. Select the Power Over Ethernet tab.
Note
The Power Over Ethernet tab appears only for AT-8524POE switches.
4. In the graphic image of the switch, click the port you want to
configure. A selected port turns white. You can configure more than
one port at a time.
5. Click Modify.
The PoE Port Configuration menu is shown in Figure 57.
Figure 57 PoE Port Configuration Page