Allied Telesis AT-S62 - Manual (Page 69)

AT-S62 Web Browser Interface User’s Guide
Section I: Basic Operations 69
Displaying the MAC Address Table
To view the MAC address table, perform the following procedure:
1. From the Home page, select either Configuration or Monitoring.
2. Select the Layer 2 menu option.
3. Select the MAC Address tab.
Figure 19 shows how the tab appears when displayed through
the Configuration page. If displayed through the Monitoring
page, the Add buttons and the Delete section at the bottom of the
window are not included. The buttons are used to add static and
multicast address to the switch as explained in Adding Static
Unicast and Multicast MAC Addresses on page 72. The Delete
section is used to delete all dynamic MAC addresses, as explained
in Deleting All Dynamic Unicast and Multicast MAC Addresses on
page 75.
Figure 19 MAC Address Tab (Configuration)