Allied Telesis AT-S62 - Manual (Page 122)

Chapter 12: Classifiers
Section II: Advanced Operations 122
Some of the variables and settings display additional selections.
For example, selecting IP as the Protocol displays the selections
shown in Figure 35.
Figure 35 Create Classifier Page - IP Protocol
9. Configure the parameters as needed. They are defined here:
ID
Specifies an ID number for the classifier. Every classifier on the
switch must have a unique ID number. The range is 1 to 9999. This
parameter is required.
Description
Specifies a description for the classifier. A description can be up to
fifteen alphanumeric characters. Spaces are allowed.
Destination MAC
Defines a traffic flow by its destination MAC address.
Source MAC
Defines a traffic flow by its source MAC address.
Priority
Defines a traffic flow by the user priority level in tagged Ethernet
frames. The range is 0 to 7.